FREE SHIPPING!!!!!
The LP4 series from Baja Designs is the off-road lighting solution for those who are big on adventurous spirit but short on space. At just 5.1” high x 5” wide,the LP4 Pro utilizes 4 forward projecting next-generation LEDs plus 2 IPT LEDs per side to provide 200 degrees spread of light that offers lighting in zones 1-3 along with zone 4 at a total raw lumens of 8,857. The LP4 Pro will fit on almost any vehicle, including Jeeps, trucks, motorcycles, UTVs, and any other vehicle that needs additional lighting. With a selection of accessories for the LP4 Pro, from rock guards to replacement lenses, security hardwear, IPT covers and harnesses, we have the accessories that will make your LP4 perform to it’s full potential. NOTE: When installing LP4 lights on the a-pillar/ditch light configuration, we recommend our IPT covers to block hood/cabin glare. To learn more about why, read our blog HERE
- 8,857 Total Raw Lumens
- 75.9W/5.5A
- Zones: 1-4
- Backlight Options: Amber, Red, Blue, Green
Direct Ducted Cooling (DDC) – With so much power, a cooling system was an integral part of making the LP series perform at the highest lever. Direct Ducted Cooling, or DDC has been designed in all of the LP series lights for exceptional heat dispersion. This acts as channels, allowing air to travel from the front of the housing to the rear heat sinks keeping the lights from overheating while in use.
Integrated Peripheral Technology (IPT) – One of the features that makes the LP series the best on the trail is Integrated Peripheral Technology, or IPT for short. The IPTs allows the LP series to provide an incredible 200-degree spread of usable light, combining forward and cornering light in an all-in-one package.
uService Lens Replacement – Keeping the LP series running at the highest level means having a lens that is free of damage. All LP series lights have been designed with Baja Designs uService technology. Changing a damaged lens and customizing your light pattern is made easy as unscrewing the housing bolts in the back and installing a new lens. All this can be done in your garage or on the trail without the fear of voiding your Lifetime limited warranty.
Color Backlight Options – Our LP Pro series models offer color backlight options. Choose from amber, red, green, or blue giving enthusiasts the choice to customize their vehicles for shows, photo shoots, or anywhere they want to bring attention.
Specifications
| Amperage Rating (A) |
5.500 |
| Average Rated Life (hr.) |
49,930 |
| Backlight Amperage Rating (A) |
0.350 |
| Backlight Wattage (W) |
4.830 |
| Beam Pattern |
Spot |
| Bezel Material |
Billet Machined Aluminum |
| Brightness (Lumens) |
8857 |
| Description |
Spot; Clear; Pair |
| Housing Color |
Black |
| Housing Material |
Hard Anodized Machined Aluminum |
| Lens Color |
Clear |
| Lens Material |
Hardcoated Polycarbonate |
| Light Quantity |
2 |
| Lighting Modes |
Beam/Day-Time Running Backlighting |
| Lighting Quantity |
4 |
| Lighting Technology |
LED |
| Lighting Type |
Forward Projecting |
| Mounting Hardware Included |
Yes |
| Mounting Hardware Material |
Stainless Steel |
| Overvoltage Protection |
Built-In |
| Product Type |
LP4 Pro LED Light Pod Pair w/ Wiring Harness |
| Secondary Amperage Rating (A) |
1.000 |
| Secondary Brightness (Lumens) |
1972 |
| Secondary Light Quantity |
4 LEDs |
| Secondary Lighting Technology |
LED |
| Secondary Lighting Type |
Integrated Peripheral Technology (IPT) |
| Secondary Wattage (W) |
15 |
| Terminal Connector |
DT06-4S Deutsch |
| Terminal Type |
Mating Connector |
| Universal or Specific |
Universal |
| Wattage (W) |
75.900 |
| Wiring Harness Included |
Yes |
