Lower support:
1. The lower arm brace is mounted to the front of the lower A arm frame brackets. Remove the nuts from both the left and right side arm mounts.
2. Install the supplied bracket with the BENT up section going upward. It can only fit one way. Tighten the A arm nuts tight. Use loctite if you desire.
Upper support:
The upper arm support is two brackets that go front and rear of the forward upper arm mount with 2 included longer bolts and nuts.
1. remove the 2 nuts on the forward front upper A arm mounts. Left and right.
2. Remove the passenger bolt. The arm usually never move so the bolt will come out and the new one should go in easily.
3. Install ORDER. Install the new longer supplied bolt through the new plate, and then through the frame mount and A arm. Once through install the other support plate towards the front and loosely install the nut.
4. swing the arm supports up to the drivers side. Install the drivers side the same way as the passenger side and tighten the bolts. Use loctite if you desire.
Your all done! Thanks for the order!
This product was added to our catalog on Tuesday 20 July, 2021.
